Comments on: How to Program A New Keyless Entry Remote Ford BA Falcon

By: Sarah

Sarah — Wed, 14 May 2008 00:43:20 +0000

I have a keyless romote for Ford Mustang and i want to program it to my husbands ‘99 Mustang. Any suggestions? Thank you in advance.

King regards,
Sarah

By: theDuck

theDuck — Thu, 08 May 2008 19:40:50 +0000

Jason - I sent you a link within minutes of your beer, mate, and, as I said in the email, the link expires after 24 hours.

I’ve reactivated the old one and forwarded it back through to your gmail.

Please check your junk filter in case it’s been caught there.

By: jeff

jeff — Thu, 08 May 2008 11:42:58 +0000

got given 2 new remotes 2 years ago, no one would assist in their reprogramming unless I handed over $50 - tried your method and it worked first time. Great accurate advice - thanks

By: Jason

Jason — Thu, 08 May 2008 11:31:24 +0000

Hi. Bought you beer 5 days ago. Can you pls send me the link ? Cheers

By: ron

ron — Tue, 06 May 2008 06:00:41 +0000

i bought a new remote for my 1995 fairmont and have tried everything but it wont workcan u help pls

By: Amak

Amak — Wed, 30 Apr 2008 04:41:56 +0000

Toodle pip Wrote:
Hello there!

Just wondering if you can tell me (or tell me where to find) the programming procedure for a ‘93 Fairmont Ghia? I tried the procedure you describe above, but got no joy…

Thanks!!!

Here is my answer:
Hi Toodle pip,

The correct way to put a 93 EB Fairmont Ghia into ‘Training’ Mode is:
1. Put the ford into accessory mode (I or 1)
2. Push the ‘boot/tailgate’ release button 3 times (next to fuel cover opener button)
The door locks should then cycle (locked/unlocked)
3. Push your NEW remote door button once the doors should cycle (not sure about the BOOT button tho) then do the same with your old remote (if possible).
4. Exit ‘training’ mode by turning the car fully off.

Please keep in mind you can have up to 4 different keyless entry remotes. These instructions were taken DIRECTLY from my Ford owners manual for my 93′ Ford EB Fairmont Ghia.

By: dave

dave — Sun, 27 Apr 2008 01:56:29 +0000

I was wondering if you knew where to find a workshop manual for 1998 AU1 Ford Falcon XR8 (tickford model) as Ive searched and searched to no avail
cheers

Dave

By: Will C Mars

Will C Mars — Wed, 09 Apr 2008 12:57:32 +0000

If you’re looking for a particular programming guide or trying to save some money buying a replacement keyless entry, check out iKeyless, they had my Honda Civic’s keyless remote for like 45 bucks, and the dealer was gonna charge me like over 100 dollars. It came with programming instructions and I havn’t any problems with it. (FROM THE EDITOR - PLEASE DON’T drop commercial links - links removed).

By: ceejay

ceejay — Mon, 07 Apr 2008 02:41:57 +0000

Roger, I was resigned to visit a Ford Dealer, but found out that an automotive locksmith may have the plug-in “black box” that can program the new key to your car. My new spare key was supplied, cut and programmed by the auto locksmiths in Altona (Melb) look them up in the Yellow Pages if the area suits.

Your car handbook has the step by step instructions to program additional keys (up to 8 iirc) if you have TWO original working keys.

By: theDuck

theDuck — Thu, 03 Apr 2008 22:06:51 +0000

So Roger - as Ceejay alluded to above, unlike the remotes, it’s just not possible to program a new key to your car without visiting the ford dealer UNLESS you have at least two existing keys.

If you’ve got two existing keys that are already programmed to the car their is a process you can use (simillar to the keyfob programming sequence) but it eludes me right now - I’m pretty sure it’s in the manual.

Cheers,